This position of Crane Operator is responsible for all operating functions as listed below. Running the crane must be understood in total with the focus of utilizing the equipment to meet all the

quality and productivity goals as outlined in our quality system.

DUTIES

ESSENTIAL JOB FUNCTIONS:

Listed below are the primary activities which must be learned,

understood and followed according to work instructions. The normal

time frame for completion of training is approximately three months.

The Process Engineer / Supervisor will monitor each person's

progression and provide any necessary instruction or direction as

deemed necessary during the training period.

Loading of scrap basket with stainless and carbon scrap per heat recipe

Unloading of scrap from railroad cars (and trucks) and placing in designated bin.

Any other crane operation.

Miscellaneous: Performed as necessary or when assigned by a supervisor

a. Follow all prescribed safety rules

b. Housekeeping

c. Periodic maintenance check of equipment

d. Assist maintenance during down times

SUPPLEMENTAL JOB FUNCTIONS:

1.Other duties as assigned.

2.Participation in continuous improvement programs.

QUALIFICATIONS

MINIMUM EDUCATION, SKILLS AND EXPERIENCE:

Minimum of High School Degree or Equivalent (GED)

Must work well with others

Good Communication Skills

Time Management Skills

Basic Computer Skills

PHYSICAL ABILITIES REQUIRED:

Mobility in plant.

While performing the duties of this Job, the employee is regularly required to sit.

The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms.

The employee must occasionally lift and/or move up to 10 pounds.

Visual ability with or without correction.

Communication abilities.

Mobility: Stand (stationary) - 5%, stand/walk - 5%, walking -5%, sitting - 85%.

Strength and Agility: Lifting - occ. 150, carrying - con. 15,

push/pull - occ.150, climbing - freq. and to heights above 100ft, balancing - fre., bendi - fre., stooping - occ., crouching - occ., kneeling - occ., crawling - occ., running - occ., twisting - occ.,turning - occ.

Dexterity: Grasping (firm/strong), finger dexterity/handling, reaching.

Depth perception

HEALTH AND SAFETY

1.Work in compliance with the Occupational Health and Safety Act and regulations.

2.Follow Company safety rules.

3.Report the absence of or defect in any protective equipment or clothing to the Supervisor or Manager immediately.

4.Use or wear the equipment, protective devices or clothing that is required to be used or worn:

Safety shoes

Safety glasses

Hearing protection

Hard Hat

Any/all other Required NAS PPE

5.Report to the Safety Coordinator, Group Lead or Supervisor any contravention of the Occupational Health and Safety Act and Regulations or Company policy.

6.Must follow all Lock out Tag out (LOTO) guidelines for designated machines.

7.Maintain a clean and safe work area.

WORK ENVIRONMENT:

1.Work in compliance with the Occupational Health and Safety Act and regulations.

2.Clean, well ventilated and safe work areas.